338: Unknown OID '9.1.283' on Catalyst 6509

ID	Project	Category	View Status	Date Submitted	Last Update

338	RackTables	SNMP	public	2010-05-21 13:35	2018-11-14 14:50

Reporter	tylerwagner	Assigned To	adoom42
Priority	normal	Severity	minor	Reproducibility	always
Status	closed	Resolution	fixed
Product Version	0.17.9
Target Version	0.22.0

Summary	338: Unknown OID '9.1.283' on Catalyst 6509
Description	I have a Cisco Catalyst 6509. SNMP Sync produces this error: Unknown OID '9.1.283' Ports are of the form: interface GigabitEthernet1/1 ... interface GigabitEthernet1/48 interface GigabitEthernet5/1 interface GigabitEthernet5/2 All ports are standalone (no SFP). Attached is a full SNMP walk.
Additional Information	SWITCH1#show hardware Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXH4, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Mon 10-Nov-08 08:30 by prod_rel_team ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1) .... cisco WS-C6509 (R7000) processor (revision 2.0) with 458720K/65536K bytes of memory. Processor board ID SCA042100VU SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache Last reset from s/w reset 3 Virtual Ethernet interfaces 50 Gigabit Ethernet interfaces 1917K bytes of non-volatile configuration memory. 8192K bytes of packet buffer memory. 65536K bytes of Flash internal SIMM (Sector size 512K). Configuration register is 0x2102
Tags	No tags attached.

2010-05-21 13:35	snmpdump.txt (434,087 bytes)

tylerwagner 2010-05-21 14:55 reporter ~0000085	Correction: Two ports have SFP: GigabitEthernet5/1 is only an SFP port, and is empty. GigabitEthernet5/2 is both a gigabit ethernet port (currently used) and an SFP port (currently empty).

infrastation 2010-05-24 16:53 administrator ~0000086	To get a list of installed line cards (similar to one of "show module"), it may help to look into 1.3.6.1.2.1.47.1.1.1.1 SNMP OID. With that information it is possible to generate necessary number of ports without checking type of each port. See function generatePortsForCatModule() in trunk for an example.

infrastation 2010-12-02 17:02 administrator ~0000198	Modular systems are not currently supported. Can be considered for reopening, when this is necessary code to handle such data. Closing.

adoom42 2012-01-29 06:03 administrator ~0000546	Re-opened this because I'll be adding support for stackable switches.

tylerwagner 2012-08-29 12:49 reporter ~0000766	Great. Let me know if you need testing on Catalyst 6500-series.

Date Modified	Username	Field	Change
2010-05-21 13:35	tylerwagner	New Issue
2010-05-21 13:35	tylerwagner	File Added: snmpdump.txt
2010-05-21 14:55	tylerwagner	Note Added: 0000085
2010-05-24 16:53	infrastation	Note Added: 0000086
2010-12-02 17:02	infrastation	Note Added: 0000198
2010-12-02 17:02	infrastation	Assigned To	=> infrastation
2010-12-02 17:02	infrastation	Status	new => closed
2010-12-02 17:02	infrastation	Resolution	open => won't fix
2012-01-29 06:03	adoom42	Note Added: 0000546
2012-01-29 06:03	adoom42	Assigned To	infrastation => adoom42
2012-01-29 06:03	adoom42	Status	closed => assigned
2012-01-29 06:03	adoom42	Resolution	won't fix => reopened
2012-08-29 12:49	tylerwagner	Note Added: 0000766
2013-02-24 20:46	adoom42	Sub-category	=> SNMP-Modular
2013-02-24 20:54	adoom42	Tag Attached: modular
2014-12-26 22:58	adoom42	Status	assigned => closed
2014-12-26 22:58	adoom42	Resolution	reopened => fixed
2014-12-26 22:58	adoom42	Fixed in Version	=> 0.21.0
2014-12-26 22:58	adoom42	Target Version	=> 0.21.0
2017-09-26 11:12	infrastation	Fixed in Version	0.21.0 =>
2017-09-26 11:12	infrastation	Target Version	0.21.0 => 0.22.0
2018-11-14 14:50	infrastation	Tag Detached: modular